tensile modulus
英
美
网络 拉伸模量; 抗拉模量; 拉伸弹性模量; 拉伸模数; 张力模量
双语例句
- The factors which affect the tensile modulus of solid composite propellant are discussed from four aspects: fillers, binder, filler/ binder interaction and processing technology, and the approaches are proposed to tailor the initial tensile modulus of composite solid propellant.
从填料、粘合剂、界面作用和工艺四个方面对影响复合固体推进剂模量的因素进行了讨论，提出了调节复合固体推进剂模量的技术途径。 - Through math analysis of math model, it could get the smaller of overfeeding sewing shrinkage when the fabric bending – tensile modulus ratio and the fabric connection length ratio were bigger, and the connection length was smaller.
通过对数学模型的数字解析可知：面料弯拉模量比越大、面料连接长度比越大、面料连接长度越小，超喂缝缩率越小。 - Tensile modulus and yield stress of blends increase with concent ratio n of PMMA.
结果表明，共混物的拉伸模量、屈服应力随PMMA含量增加略有增大。 - An analytical algorithm to estimate the tensile modulus of Brazilian disk splitting tests is presented.
提出巴西圆盘劈裂试验中拉伸模量的解析算法。 - With the increase of the denim mass content, the tensile strength and the breaking elongation increase, but the tensile modulus decreases.
随着牛仔织物质量分数增大，拉伸强度增大，断裂伸长率增大，拉伸模量降低。 - The effects of glass bead content and its size on the elastic tensile modulus ( E) of the filled low density polyethylene ( LDPE) composites are studied.
研究了填充低密度聚乙烯中玻璃微珠含量及其大小对复合体系拉伸弹性模量E的影响。 - Addition of carbon black had the effect of reinforcing, increased the 100% tensile modulus, tear strength, tensile strength and Shore A hardness, decreased the elongation at break and permanent set at break.
加入炭黑，可以起到补强作用，提高100%定伸应力、撕裂强度、拉伸强度和硬度，减小扯断伸长率和扯断永久变形。 - On the basis of the elastic theory for different compressive and tensile moduli, the deformation regularity of surrounding rocks in tunnels under hydraulic pressures was discussed, and mathematical expressions of the elastic resistance coefficient, the elastic compressive modulus, and the elastic tensile modulus were deduced.
采用拉压不同模量弹性理论，探讨水工压力隧洞围岩变形规律，推导了圆形隧洞弹性抗力系数与拉伸弹性模量、压缩弹性模量的数学表达式。 - The increase of draw ratios in three-stage drawing process decrease the linear density of PAN fiber and improve the strength, sonic orientation and tensile modulus.
三级拉伸工艺中各拉伸比的提高均有利于PAN纤维线密度的减小及其强度、声速取向度和抗张模量的提高； - In the bulk system, tensile strength, tensile modulus and impact strength are improved by 32.2%, 60.3% and 68.6%, respectively, without the loss of light transmittance.
而本体法复合材料的拉伸强度、拉伸模量及冲击强度值最大分别提高了32.2%、60.3%和68.6%，而透光性能基本未受影响。